Simple Melody Generator Circuit Diagram

Here is the simplest melody generator circuit you can make using an IC.The UM66 series are CMOS IC’s designed for using in calling bell, phone and toys. It has a built in ROM programmed for playing music. The device has very low power consumption.Thanks for the CMOS technology.The melody will be available at pin3 of UM66 and here it is amplified by using Q1 to drive the speaker.Resistor R1 limits the base current of Q1 within the safe values.Capacitor C1 is meant for noise suppression.

Parts:

R1 = 4.7K
IC = UM66T
Q1 = 2N2222
C1 = 10uF-16v
S1 = On/Off Switch
B1 = 1.5 - 4.5 Battery
SP = 2R Speaker

Notes:

• Power supply must be between 1.5V & 4.5V .Do not exceed 4.5 V.
• Speaker can be driven with external NPN transistor.
• Melody begins from the first note if power is reseted.
• Assemble the circuit on a good quality common board.

Tweet